至顶网›软件频道 ›Linux操作系统下关于两种时钟设置的问题

Linux操作系统下关于两种时钟设置的问题

扫一扫
分享文章到微信
扫一扫
关注官方公众号
至顶头条

以下内容是关于帮助你在Linux下设置日期和时间的一些步骤，也包含了一点ntpd时间同步的内容。特别提醒的是在发行版本的限制是red hat系列，包括fedora,centos,redflag,unbreakable linux等。

作者：赛迪网来源：赛迪网 2007年10月7日

There are two clocks to configure in Linux, the hardware clock and the system clock. The hardware clock determines the system clock on system boot. While the system is running, changes to one of these doesn't affect the other.

在Linux下有两个时钟需要配置，硬件时钟和系统时钟。硬件时钟在系统启动时决定系统时钟，当系统处于运行状态下时，修改其中任何一个并不能对另一个默认生效。

Note: it's best to set the hardware clock and have the system clock be set upon a reboot. Changing the system clock by using the date program on a running system could cause date discontinuities and consequently problems. If you will be using ntpd, you probably don't need to set either of these clocks (unless the current time is more than 1000s off the real time). Just setup ntpd and let ntpd adjust the time (it will do it in small steps to keep system timestamps reliable).

现在大部分的发行版本在图形界面下都提供了时钟设置工具，例如kde,gnome都有友好的图形化工具，这里就不多说了。

You can use timeconfig to configure the timezone and UTC settings. Timeconfig will update /etc/sysconfig/clock and /etc/localtime.

Set the time zone manually if not already set.

Linux uses the file /etc/localtime to determine the time zone. This file should be either a copy of the appropriate timezone file from the directory /usr/share/zoneinfo or a symbolic link. If your time zone is incorrect, create a symbolic link to the appropriate timezone file.

# ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
Set whether hwclock uses local time or UTC

Edit the file /etc/sysconfig/clock and change "UTC=" to true or false.
If you have a dual-boot system with Windows, using UTC may cause problems for Windows.

Set the system clock

# date MMDDhhmmCCYY.ss
where MM is month, DD is day, hh is hour, mm is minutes,
CCYY is year and ss is seconds. Time should be in 24-hour notation.

To only set the time:

# date -s hh:mm:ss
Set the hardware clock

To set the hardware clock to the current system clock:

# setclock
this method looks at /etc/sysconfig/clock to determine whether the hardware clock is set to UTC

Another method:

# hwclock --systohc# hwclock --systohc --utc
use the second option if you use UTC.

Set hwclock manually:

# hwclock --set --date="9/22/96 16:45:05"
Everytime you use the hwclock --set command,
it will create or edit the file /etc/adjtime to determine the systematic drift.
Once you have some history,
you can use the --adjust option to adjust the hardware clock appropriately.
Run as a cron job if you want the clock to adjust automatically on a regular schedule.
Don't use the --adjust function when using ntpd since ntpd will turn the "11 minute mode" on,
which is best left alone. See the hwclock manpage for more info.

Setup ntpd for automatic synchronization with a remote server.

Run Red Hat's setup utility to make ntpd start on boot up and edit /etc/ntp.conf

Set server and fudge options:

server time.nist.govfudge time.nist.gov stratum 10
Enable multicastclient:

multicastclient # listen on default 224.0.1.1
Edit /etc/sysconfig/ntpd if necessary. The default should be fine.

Start the ntpd daemon:

# service ntpd start