第七部分
07、Executable file formats --->
07.01、
Kernel support for ELF binaries ELF是开放平台下最常用的二进制文件，它支持不同的硬件平台。
07.02、< > Kernel support for a.out and ECOFF binaries 这是早期UNIX系统的可执行文件格式，目前已经被ELF格式取代。
07.03、< > Kernel support for MISC binaries此选项允许插入二进制的封装层到内核中，当使用Java、.NET、Python、Lisp等语言编写的程序时非常有用。
第八部分
08.06、ATA/ATAPI/MFM/RLL support ---> ATA设备选项
08.06.01、<*> ATA/ATAPI/MFM/RLL support
08.06.02、<*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
08.06.03、[ ] Support for SATA (deprecated; conflicts with libata SATA driver)
08.06.04、[ ] Use old disk-only driver on primary interface
08.06.05、<*> Include IDE/ATA-2 DISK support
08.06.06、
Use multi-mode by default
08.06.07、<*> Include IDE/ATAPI CDROM support
08.06.08、< > Include IDE/ATAPI FLOPPY support 偶青铜镜没有软驱，这项就去掉了。
08.06.09、< > SCSI emulation support
08.06.10、[ ] IDE Taskfile Access
--- IDE chipset support/bugfixes
08.06.11、<*> generic/default IDE chipset support
08.06.12、[ ] CMD640 chipset bugfix/support
08.06.13、[ ] CMD640 enhanced support
08.06.14、[ ] PNP EIDE support
08.06.15、[ ] PCI IDE chipset support
08.06.16、
Sharing PCI IDE interrupts support
08.06.17、[ ] Boot off-board chipsets first support
08.06.18、<*> Generic PCI IDE Chipset Support
08.06.19、< > RZ1000 chipset bugfix/support
08.06.20、
Generic PCI bus-master DMA support
08.06.21、[ ] Force enable legacy 2.0.X HOSTS to use DMA
08.06.22、
Use PCI DMA by default when available
08.06.23、[ ] Enable DMA only for disks
08.06.24、< > AEC62XX chipset support 从 08.06.24 到 08.06.43 ，偶青铜镜全部咔嚓了。
08.06.25、< > ALI M15x3 chipset support
08.06.26、< > AMD and nVidia IDE support
08.06.27、< > ATI IXP chipset IDE support
08.06.28、< > CMD64{3|6|8|9} chipset support
08.06.29、< > Compaq Triflex IDE support
08.06.30、< > CY82C693 chipset support
08.06.31、< > Cyrix/National Semiconductor CS5530 MediaGX chipset support
08.06.32、< > HPT34X chipset support
08.06.33、< > HPT36X/37X chipset support
08.06.34、< > National SCx200 chipset support
08.06.35、< > Intel PIIXn chipsets support
08.06.36、< > NS87415 chipset support
08.06.37、< > PROMISE PDC202{46|62|65|67} support
08.06.38、< > PROMISE PDC202{68|69|70|71|75|76|77} support
08.06.39、< > ServerWorks OSB4/CSB5/CSB6 chipsets support
08.06.40、< > Silicon Image chipset support
08.06.41、< > SiS5513 chipset support
08.06.42、< > SLC90E66 chipset support
08.06.43、< > Tekram TRM290 chipset support
08.06.44、<*> VIA82CXXX chipset support 偶青铜镜用的是威盛KT880+VT8237芯片组。
08.06.45、[ ] IGNORE word93 Validation BITS |
08.07、SCSI device support --->
08.07.01、<*> SCSI device support SATA硬盘这里要选上！
08.07.02、
legacy /proc/scsi/ support
08.07.03、 <*> SCSI disk support 偶青铜镜开始编译内核时，没把这选上，结果SATA硬盘的设备号由/dev/sda变成/dev/hde，还唱着沙哑的歌，跟偶闹心。偶急啊。把这项选上，设备号变成/dev/sda，硬盘才正常工作。
08.07.04、< > SCSI tape support SISC磁带机支持，服务器备份的工具。从 08.07.04 至 08.07.12.10 ，偶整不太明白，但觉得这些选项是和服务器相关的，跟偶台式机没搭界。因此，咔嚓了没商量。
08.07.05、< > SCSI OnStream SC-x0 tape support
08.07.06、< > SCSI CDROM support
08.07.07、< > SCSI generic support
--- Some SCSI devices (e.g. CD jukebox) support multiple LUNs
08.07.08、[ ] Probe all LUNs on each SCSI device
08.07.09、[ ] Verbose SCSI error reporting (kernel size +=12K)
08.07.10、[ ] SCSI logging facility
08.07.11、SCSI Transport Attributes --->
08.07.11.01、<M> Parallel SCSI (SPI) Transport Attributes
08.07.11.02、<M> FiberChannel Transport Attributes
08.07.11.03、 <M> iSCSI Transport Attributes
08.07.12、SCSI low-level drivers --->
08.07.12.01、< > Adaptec I2O RAID support
08.07.12.02、[ ] LSI Logic New Generation RAID Device Drivers
08.07.12.03、< > LSI Logic Legacy MegaRAID Driver (NEW)
08.07.12.04、
Serial ATA (SATA) support
08.07.12.05、< > AHCI SATA support
08.07.12.06、< > ServerWorks Frodo / Apple K2 SATA support
08.07.12.07、< > Intel PIIX/ICH SATA support
08.07.12.08、< > Promise SATA TX2/TX4 support
08.07.12.09、< > Pacific Digital SATA QStor support
08.07.12.10、< > VIA SATA support 这个选项，偶青铜镜因为用VIA KT880+VT8237芯片组，
就把它作为驱动编译加入内核，make以后提示没找到 VIA SATA 。出错了。把它做为模块加
载入内核，编译正常。
08.07.12.10、< > VITESSE VSC-7174 SATA support
08.07.12.10、< > BusLogic SCSI support
08.07.12.10、[ ] Omit FlashPoint support
08.07.12.10、< > DMX3191D SCSI support
08.07.12.10、< > EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)
support
08.08、Multi-device support (RAID and LVM) --->
08.08.01、[ ] Multiple devices driver support (RAID and LVM) 普通Linux用户通常
不需要RAID（廉价冗余磁盘阵列）或者LVM支持。以下至08.08.10，我是全部去掉的.
08.08.02、< > RAID support
08.08.03、< > Linear (append) mode
08.08.04、< > RAID-0 (striping) mode
08.08.05、< > RAID-1 (mirroring) mode
08.08.06、< > RAID-4/RAID-5 mode
08.08.07、< > RAID-6 mode
08.08.08、< > Multipath I/O support
08.08.09、< > Faulty test module for MD
08.08.10、< > Device mapper support
08.09、Fusion MPT device support --->
08.09.01、<M> Fusion MPT (base + ScsiHost) drivers
(40) Maximum number of scatter gather entries
08.09.02、<M> Fusion MPT misc device (ioctl) driver
08.09.03、<M> Fusion MPT LAN driver
08.10、IEEE 1394 (FireWire) support ---> 笔记本上会用到，台式机特别是兼容机一般没有！
偶的兼容机，当然没有这玩意，支掉没商量。以下至08.10.14，我是全部去掉的.
08.10.01、< > IEEE 1394 (FireWire) support
--- Subsystem Options
08.10.02、[ ] Excessive debugging output
08.10.03、[ ] OUI Database built-in
08.10.04、[ ] Build in extra config rom entries for certain functionality
08.10.05、[ ] IP-1394 Entry
--- Device Drivers
08.10.06、< > Texas Instruments PCILynx support
08.10.07、< > OHCI-1394 support
--- Protocol Drivers
08.10.08、< > OHCI-1394 Video support
08.10.09、< > SBP-2 support (Harddisks etc.)
08.10.10、[ ] Enable Phys DMA support for SBP2 (Debug)
08.10.11、< > OHCI-DV I/O support
08.10.12、< > Raw IEEE1394 I/O support
08.10.13、< > IEC61883-1 Plug support
08.10.14、< > IEC61883-6 (Audio transmission) support
08.11、I2O device support --->
08.11.01、<M> I2O support
08.11.02、<M> I2O Configuration support
08.11.03、<M> I2O Block OSM
08.11.04、<M> I2O SCSI OSM
08.11.05、<M> I2O /proc support |
08.12、Networking support 网络支持。青铜镜友情提示：这个选项里面的小项，请谨慎谨慎
再谨慎！否则，用上新内核后，却上不了网，够你郁闷三天天三夜。
下面的内容见详细介绍 Linux中内核配置选项（2）。
京公网安备 11010802021500号