删除之后恢复cisco2950交换机ios系统4

删除之后恢复cisco2950交换机ios系统4

Proceed with reload? [confirm] 回车

　　 00:01:04: %SYS-5-RELOAD: Reload requested

　　 System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

　　 Copyright (c) 1999 by cisco Systems, Inc.

　　 TAC:Home:SW:IOS:Specials for info

　　 PC = 0xfff0a530, Vector = 0x500, SP = 0x680127b0

　　 C2600 platform with 24576 Kbytes of main memory

　　 PC = 0xfff0a530, Vector = 0x500, SP = 0x80004684

　　 monitor: command "boot" aborted due to user interrupt

　　 rommon 1 > confreg （ 输入“confreg”命令）

　　 Configuration Summary

　　 enabled are:

　　 load rom after netboot fails

　　 console baud: 115200

　　 boot: image specified by the boot system commands

　　 or default to: cisco2-C2600

　　 do you wish to change the configuration? y/n [n]: y (选择 yes)

　　 enable "diagnostic mode"? y/n [n]: n (选择 no)

　　 enable "use net in IP bcast address"? y/n [n]: n (选择 no)

　　 disable "load rom after netboot fails"? y/n [n]: n (选择 no)

　　 enable "use all zero broadcast"? y/n [n]: n (选择 no)

　　 enable "break/abort has effect"? y/n [n]: n (选择 no)

　　 enable "ignore system config info"? y/n [n]: n (选择 no)

　　 change console baud rate? y/n [n]: y (选择 yes)

　　 enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400

　　 4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [7]: 0 (选择 0,改回用标准速率速率9600的xmodem传输)